MM5中新边界层方案的引入和对比试验   总被引：10，自引：4，他引：10       下载免费PDF全文

江勇  赵鸣 《气象科学》2002,22(3):253-263

本文介绍了一种新的边界层方案，即E－ε－1方案，并用五种层结下的通量廓线关系计算地面通量，将其引入到中尺度数值天气预报模式MM5中，并用新的边界层方案对江淮流域存季暴雨进行了短期模拟，与此同时，对新的方案和模式原有的各种边界层方案作了比较，对此得到了一些有价值的结果。  相似文献   

四川古蔺县蒿枝湾滑坡灾毁土地整理可行性研究   总被引：4，自引：0，他引：4  

吴树仁  田震远  吴锡浩  石菊松  雷伟志  范树应  胡江  孙应举 《水文地质工程地质》2002,29(4):21-23

在野外调查四川省古蔺县近年来滑坡灾毁土地情况和特征的基础上，以蒿枝湾滑坡为例，分析蒿枝湾滑坡基本特征和灾毁土地现状，并从滑坡潜在稳定性、工程技术条件和社会经济效益等方面探讨滑坡灾毁土地整理的可行性。  相似文献   

铼—锇同位素分析中试样化学预处理方法进展   总被引：4，自引：0，他引：4  

张巽  金立新等 《岩矿测试》2002,21(1):49-54

评述了用于Re-Os同位素体系分析的化学前处理技术的发展。简要介绍了卡洛斯管熔样法、Os的CCl4提取、溴提取和微蒸馏方法。卡洛斯管封闭熔样方法，有效地防止了Os的挥发损失和保证了Os同位素平衡，是一种很有发展前景的熔样方法。蒸馏法仍是分离和纯化Os的有效方法，溶剂（CCl4)提取和溴提取法在许多实验室里应用，而微蒸馏则是Os的二次纯化的主要方法。Re的化学分离和纯化仍是离子交换和萃取法。引用主要文献29篇。  相似文献   

川滇密西西比河谷型铅锌矿床成矿流体来源研究:流体Na-Cl-Br体系的证据   总被引：11，自引：1，他引：11  

李泽琴  王奖臻  倪师军  李朝阳  胡晓强  李桃叶 《矿物岩石》2002,22(4):38-41

应用流体包裹体滤液分析方法，测定了川滇7个MVT铅锌矿床成矿流体的Na,Cl,Br含量，结果表明成矿流体的x(Na/Br)和x(Cl/Br)的平均值分别为185和73，并与高度蒸发浓缩的残留海水的x(Na/Br)和x(Cl/Br)相近。成矿流体的Na,Cl含量呈正相关，在lgNa-lgCl图解中呈线性分布。根据这些事实以及矿床地质特征，认为原始成矿卤水起源于蒸发浓缩的残留海水，原始含矿卤水与富含有机质的大气降水混合导致矿质沉淀而成矿。  相似文献   

湘中锑(金)矿床成矿物质来源——Ⅰ.微量元素及其实验地球化学证据   总被引：9，自引：0，他引：9  

马东升  潘家永  解庆林  何江 《矿床地质》2002,21(4):366-376

为了查明湘中盆地中-低温梯（金）矿床的成矿物质来源，文章应用高分辨率ICP-MS、ICP-AES等方法对岩石与矿石进行了系统测定，并结合作者以往分析数据和实验地球化学结果，对该区盆地及周边基底地层与矿床中的微量元素分布特征及其水/岩反应效应进行了综合分析和系统研究。结果表明：Sb、Au等成矿元素在元古界基底碎屑岩中具有高的背景含量，在近似成矿条件下的水/岩反应实验中，成矿元素的淋出率达20%～90%，元古界基底碎屑岩中的金（锑、钨）矿床的周围蚀变围岩中出现明显的金负异常区。而盆地内泥盆系统地层中的高锑含量仅局限于锑矿床（化）及其蚀变围岩中；湘中锑（金）矿床中的矿石与基底碎屑岩具有相似的稀土元素球粒陨石标准化配分曲线特征，以上微量元素地球化学特征充分证明该区锑（金）矿床锑、金等成矿物质主要来源于元古界底碎屑岩。  相似文献   

西范坪斑岩铜矿钾硅酸盐化作用的地球化学研究   总被引：2，自引：0，他引：2  

王奖臻  胡瑞忠  孙燕  陆彦  李泽琴 《矿物岩石》2002,22(1):41-45

西范坪铜矿是我国近年来新发现的斑岩型铜矿床。伴随铜矿化发生了强烈的钾硅酸盐化。蚀变作用使成矿主岩的 Si O2 ,K2 O增加 ,Ca O,Na2 O,Fe2 O3 减少 ;大离子亲石元素含量降低 ;L REE减少 ,L a N/ Yb N 比值升高 ,δEu值降低。通过研究认为 ,西范坪铜矿成矿母岩是富钠 (Na2 O>K2 O)斑岩 ,而不是富钾 (K2 O>Na2 O)岩石 ,这说明相对富钠的斑岩也能成矿。  相似文献   

Modes of raising northeastern Tibet probed by explosion seismology   总被引：4，自引：0，他引：4  

Audrey GalvéAlfred Hirn  Jiang MeiJosep Gallart  Béatrice de VoogdJean-Claude Lépine  Jordi DiazWang Youxue  Qian Hui 《Earth and Planetary Science Letters》2002,203(1):35-43

New wide-angle reflection and refraction seismic data provide constraints on the structure of the upper lithosphere, and test models of its evolution to raise the northeastern part of the Tibetan Plateau. Amplitudes observed for reflections from the crust-mantle boundary are sufficiently large to suggest that there is no significant partial melt in the deep crust. The data show an increase of the crustal thickness between terranes from north of the Kun Lun Fault into the Qang Tang of central Tibet, and a contrast among their intracrustal images and compositions. In the north, P and S velocities are consistent with a dominantly felsic composition and show that only the upper crust thickened. South of the Kun Lun Fault a thicker crust made of two layers could result from the superposition of the originally thin crust of the Bayan Har terrane on the lower part of the crust of the domain to the north, which upper crust it shoved and thickened. Different modes of crustal thickening, either by thickening of individual layers or superpositions and imbrication among them appear to work jointly to raise the topography.  相似文献   

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures     

蒋欢军  吕西林 《地震工程与工程振动(英文版)》2002,1(2):227-237

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献   

正交实验法在测绘中的应用     

樊钢  朱江  赵瑞  李伟 《测绘信息与工程》2002,27(4):27-29

以检测数字水准仪及标尺综合精度为例，介绍了正交实验法在测绘领域中的应用。  相似文献